scarf joint मीनिंग इन हिंदी

अधिक: आगे

The board can be cut in half with a tapered cut yielding a scarf joint.
It is normally joined lengthwise by an 1 : 8 scarf joint using epoxy resin glue.
The scarf joint is used when the material being joined is not available in the length required.
A scarf joint may also be used to fix problems caused when a board is cut too short for the application.
Scarf joints are much less noticeable than butt joints and even if the molding does shrink, they show little or no gap.
CAPTION : Forming a scarf joint instead of a butt joint is the neatest method of joining two lengths of molding end to end.
A : The simplest way to splice lengths of baseboard or chair rail molding is to form a scarf joint where the lengths meet, rather than a simple butt joint.
Plum-coloured and " chalky white " brick elevations join on the east side " like an elaborate scarf joint "; the north face is mostly glass, while the south side burrows into the hillside.
To make a scarf joint you simply cut off the end of each piece of molding at a 45-degree angle so that the two ends will overlap when assembled ( as shown in the illustration ).
Determination of the maximum axial force for two pieces joined by adhesive can easily be determined using two equations that can be derived from the geometry of the problem by breaking the axial force component into a tensile force and shear force normal and parallel to the scarf joint.

संज्ञा.

a joint made by notching the ends of two pieces of timber or metal so that they will lock together end-to-end
पर्याय: scarf